• No products in the cart.

Teledyne LeCroy

Showing all 16 results

  • NEW Teledyne LeCroy T3DSO4000L-HD Low Profile Digital Oscilloscope

    The Teledyne LeCroy T3DSO4000L-HD Series of Low Profile Oscilloscope features 4-channel (1U High) and 8-channel (2U High) models with Analogue bandwidth option from 500 MHz to 2 GHz. The low profile form factor combined with 12-bit High Resolution ADCs and Low Noise front end provides an impressive noise performance to cover a wide range of measurement applications. Each model offers a maximum Sample Rate of 10GSa/s per channel and a maximum Memory depth of 500Mpts. It can be remotely controlled over LAN with its built-in web server and a complete SCPI command set over the standard 1000M LAN connection. An impressive display of measurement and Math functions along with a built-in 25MHz Arbitrary Waveform Generator and 16 Channel Logic Analyzer as standard are features of the T3DSO4000L-HD.

    Key Features:

    • 4/8 Analogue Channels + 1 external trigger
    • Analogue Channel Bandwidth: up to 2GHz; Real-Time Sampling Rate of up to 10GSa/s
    • Vertical Resolution: 12-bits
    • Memory Length: 500Mpt
    • Low Noise floor: 153 uVrms at full bandwidth of 2GHz
    • Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s (sequence mode)
    • Supports 256-level intensity grading and colour temperature display modes
    • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported)
    • Serial Bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester as standard
    • Segmented Acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000),
    • History waveform record (History) function
    • Automatic measurements on 50+ parameters, supports statistics with Histogram, Track, Trend, Gating measurement, and measurements on Math, History, Memory and Ref
    • 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), supports formula editor

  • Teledyne SP Devices ADQ7DC High Performance 14-Bit Digitizer

    The Teledyne SP-Devices ADQ7DC offers 14 bits Vertical Resolution in either Single or Dual Channel mode with 10 or 5 GSPS Sampling Rate respectively improving the Resolution in High-Sampling Rate applications beyond what was previously possible. The DC-coupled front-end supports variable DC offset and contains a user-programmable digital noise-reduction filter. It also offers 3 GHz Analogue input bandwidth and therefore supports a wide range of sensors and applications. Stand alone firmware packages simplify operation and offer time savings by providing a rich set of real time application specific functions without any need for FPGA firmware development. The open onboard Xilinx Kintex Ultrascale FPGA offers available resources for custom real-time digital signal processing (DSP).

    Key Features:

    • 3GHz Bandwidth
    • Sampling Rates to 10GS/s
    • 14 Bit Resolution
    • 1-2 Channels
    • Input Voltage Range: 1 Vpp
    • USB 3.0, 10GbE, PCIe, PXIe, MTCA.4
    • Peer to Peer steaming to GPU
    • Multi Channel Synchronisation
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ14 High Performance 14-Bit Digitizer

    The Teledyne SP-Devices ADQ14 is a 14-bit Digitizer family with 1, 2, or 4 channels and 0.5, 1, or 2 GSPS Sampling Rate. It is also available with either AC or DC coupling (ADQ14AC and ADQ14DC) and comes in six different form factors. This simplifies integration and enables cost-efficient system-level design. The ADQ14 offers AC- or DC-coupling and variable DC-bias. It is also available with variable voltage input range. This combined with high analogue input bandwidth makes it support a wide range of sensors. The on-board FPGA is made available to the user through a firmware development kit. Stand-alone firmware packages simplify operation by providing a rich set of application-specific real-time functions without any need for firmware development.

    Key Features:

    • Up to 1.2 GHz Bandwidth
    • Sampling Rates: 0.5, 1, 2 GSPS per channel
    • 14 Bit Resolution
    • 1, 2, 4 Channels
    • Coupling: AC or DC
    • Programmable DC-offset: Full signal range
    • High-precision clock/trigger with multiple modes and sources
    • USB 3.0, 10GbE, PCIe, PXIe, MTCA.4
    • Multi Channel Synchronisation
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ214 High Performance 14-Bit Digitizer

    The Teledyne SP-Devices ADQ 214 Digitizer features Dual Channels, 14-bit Resolution, 400 MSPS capture rate with 850 MHz analogue input bandwidth, and a memory buffer of 64 MSample per channel. The combination of High Speed, High Resolution and Wide Bandwidth makes it ideal for broadband applications such as IF sampling of RF signals and high-speed data recording. Excellent Spectral Purity in combination with Low Noise also makes the ADQ 214 ideal for noise measurements. The ADQ 214 comes with an AC-coupled AFE with the bandwidth 10 Hz – 850 MHz, which is optimized for Spectral Purity over several Nyquist bands. The AC AFE is suitable for RF/IF Sampling and Pulse measurements. There is also a software selectable DC coupled AFE with the bandwidth 350MHz which is optimized for Base Band Signaling and High Speed Data Recording


    Key Features:

    • DC – 850 MHz Bandwidth
    • Sampling Rates: 70 – 400 MSPS
    • 14 Bit Resolution
    • Dual Channels
    • USB 2.0 & PXIe
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ214-DCLN High Performance 14-Bit Low Noise Digitizer

    The Teledyne SP-Devices ADQ214-DCLN Digitizer features Dual Channels, 14-bit resolution, 400 MSPS capture rate and is optimized for Highly Accurate Low Noise measurements. The ADQ214-DCLN is ideal for Phase Noise measurements and wideband IQ-Receivers.
    The DC-coupled Low Noise front-end is optimized for spectral purity. The anti-aliasing 100 MHz low-pass filter prevents high frequency noise from being aliased into the signal band. The ADQ214-DCLN includes a digital real-time decimation filtering for noise suppression and accurate analysis. The ADQ 214-DCLN employs two Xilinx SX50T Virtex 5 FPGAs (XC5VSX50T-1). The user can access these FPGAs and implement customized digital signal processing by purchasing the ADQ Development Kit. This kit contains everything that is needed to get started with the FPGA development, and also includes examples and documentation.


    Key Features:

    • DC to 100MHz Bandwidth
    • Sampling Rates: 400 MSPS
    • 14 Bit Resolution
    • Single Channels
    • Noise level at 100 kHz-170 dBV/?(Hz)
    • USB 2.0 & PXIe
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ1600TD High Performance 14-Bit Time Domain Digitizer

    The Teledyne SP-Devices ADQ1600TD is a world-leading 14 bit Digitizer optimized for Time-Domain pulse capture. With its unique 1600 MSPS capture rate, enabled by SP Devices’ ADC interleaving technology ADX, the ADQ1600TD opens for demanding measurements such as time-domain pulse capture and high-speed data recording. The AFE of the ADQ1600TD is AC-coupled and optimized for low background noise over a large bandwidth. The adjustable bias together with the Digital Baseline Stabilization (DBS) technology increases the dynamic range for uni-polar pulses.

    Key Features:

    • 680MHz Bandwidth
    • Sampling Rates: 1.6 GSPS
    • 14 Bit Resolution
    • Single Channels
    • Optimised for Time Domain Pulse applications
    • USB 3.0,  PCIe, PXIe, MTCA.4
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ1600RF High Performance 14-Bit RF Digitizer

    The Teledyne SP-Devices ADQ1600RF is a unique member of the ADQ V6 Digitizer family. Based on SP Devices’ interleaving technologies ADX and DBS, ADQ1600RF gets true 14bits performance at a Sampling Rate of 1.6 GSPS. This is an outstanding combination of high bandwidth and dynamic range, which enables demanding measurements such as direct RF/IF sampling of wide
    band systems.

    Key Features:

    • 750MHz Bandwidth
    • Sampling Rates: 1.6 GSPS
    • 14 Bit Resolution
    • Single Channels
    • Optimised for RF applications
    • USB 3.0, 10GbE, PCIe, PXIe, MTCA.4
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ30 High Performance 12-Bit Digitizer

    The Teledyne SP-Devices ADQ30 offers a Single Channel configuration with 1 GSPS Sampling Rate at a Vertical Resolution of 12 Bits. The programmable DC-offset makes it ideal for sampling unipolar signals. The open onboard Xilinx Kintex Ultrascale KU040 FPGA offers plenty of available resources for custom real-time digital signal processing (DSP). The ADQ30 supports peer-to-peer streaming of up to 7 Gbyte/s either to the host PC, to graphics processing units (GPUs), or solid-state disk (SSD) storage.

    Key Features:

    • 1 GHz Bandwidth
    • Sampling Rates: 1 GSPS
    • 12 Bit Resolution
    • Single Channel
    • Data Interface: PCIe Gen3 x8
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++ and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ33 High Performance 12-Bit Digitizer

    The Teledyne SP-Devices ADQ33 offers a Dual Channel configuration with up to 1 GSPS Sampling Rate at a Vertical Resolution of 12 Bits. The programmable DC-offset makes it ideal for sampling unipolar signals. The open onboard Xilinx Kintex Ultrascale KU040 FPGA offers plenty of available resources for custom real-time digital signal processing (DSP). The Software Development Kit (SDK)  includes application programming interfaces (APIs) and drivers for C/C++ and more. It also comes with stand-alone software, Digitizer Studio, which makes it easy to get started. Most software components are supported both under Windows and Linux.. The ADQ33 supports peer-to-peer streaming of up to 7 Gbyte/s either to the host PC, to graphics processing units (GPUs), or solid-state disk (SSD) storage.

    Key Features:

    • 1 GHz Bandwidth
    • Sampling Rates up to 1 GSPS
    • 12 Bit Resolution
    • Single/Dual Channel
    • Data Interface: PCIe Gen3 x8
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne SP Devices ADQ32 High Performance 12-Bit Digitizer

    The Teledyne SP-Devices ADQ32 offers a Dual Channel configuration with up to 5 GSPS Sampling Rate at a Vertical Resolution of 12 Bits. The Software Development Kit (SDK)  includes application programming interfaces (APIs) and drivers for C/C++ and more. It also comes with stand-alone software, Digitizer Studio, which makes it easy to get started. Most software components are supported both under Windows and Linux.. The ADQ32 supports peer-to-peer streaming of up to 7 Gbyte/s either to the host PC, to graphics processing units (GPUs), or solid-state disk (SSD) storage.

    Key Features:

    • 2.5 GHz Bandwidth
    • Sampling Rates up to 5 GSPS
    • 12 Bit Resolution
    • Single/Dual Channel
    • Data Interface: PCIe Gen3 x8
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne SP Devices ADQ36 High Performance 12-Bit Digitizer

    The Teledyne SP-Devices ADQ36 offers a Dual or Quad Channel configuration with up to 5 GSPS Sampling Rate at a Vertical Resolution of 12 Bits. The programmable DC-offset makes it ideal for sampling unipolar signals. The open onboard Xilinx Kintex Ultrascale KU115 FPGA offers plenty of available resources for custom real-time digital signal processing (DSP). The Software Development Kit (SDK)  includes application programming interfaces (APIs) and drivers for C/C++ and more. It also comes with stand-alone software, Digitizer Studio, which makes it easy to get started. Most software components are supported both under Windows and Linux.. The ADQ36 supports peer-to-peer streaming of up to 7 Gbyte/s either to the host PC, to graphics processing units (GPUs), or solid-state disk (SSD) storage.

    Key Features:

    • 2.5 GHz Bandwidth
    • Sampling Rates up to 5 GSPS
    • 12 Bit Resolution
    • Dual or Quad Channel
    • Data Interface: PXIe
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne SP Devices ADQ7WB Wide Bandwidth High Performance 12-Bit Digitizer

    The Teledyne SP-Devices ADQ7WB is an RF Digitizer with an analogue input bandwidth of 6.5 GHz. It supports highly linear wideband data capture, and utilize Teledyne SP Devices’ proprietary ADX technology in order to ensure industry-leading spurious-free dynamic range (SFDR). The flexible architecture allows the dual-channel input to be used either as two separate individual channels, or as a single I/Q channel. ADQ7WB offers 12 bits vertical resolution and 5 GSPS sampling rate per channel. The stand-alone firmware package FW2DDC simplify operation and offer commonly used real-time radio functions without any need for FPGA firmware development. The package include multiple digital downconverters (DDCs), decimation, and digital filtering for noise reduction or channel equalization. The open onboard Xilinx Kintex Ultrascale FPGA offers available resources for custom real-time digital signal processing (DSP).  The ADQ7WB supports peer-to-peer data streaming to selected graphics processing units (GPUs) at rates up to 7 Gbyte/s. The software development kit (SDK) includes application programming interfaces (APIs) and drivers for C/C++, Python, and more. It also comes with Stand-Alone software, Digitizer Studio, which makes it easy to get started. Most software components are supported both under Windows and Linux.

    Key Features:

    • 6.5 GHz Bandwidth
    • Sampling Rates up to 5 GSPS
    • 12 Bit Resolution
    • Dual  Channel
    • Data Interface: PCIe & PXIe
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne SP Devices ADQ412 High Performance 12-Bit Digitizer

    The Teledyne SP-Devices ADQ412 is a 2/4 (Dual/Quad) Channel flexible Digitizer that offers an outstanding combination of High Bandwidth and Dynamic range, which enables demanding measurements such as RF/IF Sampling of very wide band signals. The high Sampling Rate is enabled by SP Devices’ proprietary interleaving technology ADX. The Digitizer connects to the host via a high-speed USB 3.0 cable for easy to use standalone operation. Compact PCI Express / PXI Express or MTCA.4 µTCA interface is available for systems integration as a modular instrument. A PCIe version for integration into a PC is also available. All interface types allows for streaming of data at high transfer rates.

    Key Features:

    • Up to 2 GHz Bandwidth
    • Sampling Rates up to 2 GSPS
    • 12 Bit Resolution
    • Dual/Quad  Channel
    • Data Interface: USB, cPCIe/PXIe, PCIe, MTCA.4 µTCA
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne SP Devices ADQ8-8C Multi Channel High Performance 10-Bit Digitizer

    The Teledyne SP-Devices ADQ8-8C is intended for large scale integration offering High Channel Density and Multi Channel Synchronisation capabilities. With compact modular form factors, 8 channels per board, and high-precision multi-board synchronization capabilities, ADQ8-8C is ideal for massive multi-channel implementations.

    The on-board Xilinx FPGA is open to the user and allows for customized real-time digital signal processing. Digitized data can be transferred to the host PC at rates of 2.6 Gbyte/s. A software development kit (SDK) is included and contains application programming interfaces (APIs) and drivers for C/C++, Python, and more. It also includes Digitizer Studio – a versatile and easy-to-use tool that offers powerful configuration, control, measurement/math, and display capabilities. Most software components are supported both under Windows and Linux.

    Key Features:

    • 500MHz Bandwidth
    • Sampling Rate: 1 GSPS per channel
    • 10 Bit Resolution
    • 8 Channel
    • PXIe with 3.2 / 2.6 GByte/s Transfer rate
    • MTCA.4 with 3.2 / 2.6 GByte/s Transfer Rate
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne SP Devices ADQ8-4X Multi Channel High Performance 10-Bit Digitizer

    The Teledyne SP-Devices ADQ8-4X is intended for large scale integration. offering software-configurable sampling on two or four channels. The sampling rate is 4 GSPS in two-channel mode or 2 GSPS in four-channel mode. This feature enables flexible operation during development since the channel count and sampling rate can be varied. The ADQ8-4X supports Multi-Board Synchronization with exceptional precision, and the modular approach is scalable so that it can easily be expanded over time to include more channels.

    The on-board Xilinx FPGA is open to the user and allows for customized real-time digital signal processing. Digitized data can be transferred to the host PC at rates of 2.6 Gbyte/s. A software development kit (SDK) is included and contains application programming interfaces (APIs) and drivers for C/C++, Python, and more. It also includes Digitizer Studio – a versatile and easy-to-use tool that offers powerful configuration, control, measurement/math, and display capabilities. Most software components are supported both under Windows and Linux.

    Key Features:

    • 1 GHz Bandwidth
    • Sampling Rate: 2 or 4 GSPS per channel
    • 10 Bit Resolution
    • Single or Dual Channel
    • Data Interface: PXIe
    • Drivers for C/C++ and more
    • Digitiser Studio Stand Alone Software

  • Teledyne LeCroy WaveSurfer 3000z Digital Oscilloscope

    The WaveSurfer 3000z Series Digital Oscilloscope offers a Superior User Experience. MAUI is the most advanced Digital Oscilloscope user interface. It is designed for touch, built for simplicity, and made to solve. Waveform Anomaly Detection – A fast waveform update rate, used in conjunction with history mode, WaveScan, sequence mode, and mask testing facilitates outstanding Waveform Anomaly Detection. Biggest Touch Display – A large capacitive touch screen enables accessible and responsive touch operation. The 10.1” display is 30% larger than competitive offerings, providing more waveform viewing area. Powerful, Deep Toolbox – The standard collection of math, measurement, debug, and documentation tools provides unsurpassed analysis capabilities.

    • Bandwidth: 100MHz to 1GHz
    • Resolution: 8 Bit
    • Sampling Rate: 2GS/s (4GS/s Interleaved)
    • Long Memory up to 20Mpts
    • 16 Mixed Signal Channels
    • MAUI User Interface
    • Colour 10.1″ Touch Display
    • Powerful Analysis Toolbox
Top