Products

  • EMC Test

    EMC Test

    Electromagnetic compatibility is the test that identifies the unintentional generation, propagation and reception of electromagnetic energy which may cause unwanted effects such as electromagnetic interference or even physical damage in operational equipment. Signal Generation, Spectrum Analysis, Power Supply Systems, Amplifiers as well as Antenna Systems are used to test products and identify possible problems as well as test to compliance with certain National and International Standards EMC Test requires a number of different elements that provide the ability to transmit and receive signals for Immunity, Magnetic and Electric Field Susceptibility and Conducted and Radiated Emissions testing to an immense range of Standards in a large number of industries.
    Product Range
  • Preowned/Demo Sales

    Preowned/Demo Sales

    Product Range
  • AC & DC Power Supply/Load

    AC & DC Power Supply/Load

    Programmable AC & DC Power Supply provides technically advanced, reliable, and cost effective AC & DC power solutions that feature fast transient response, tight regulation, high peak current capability, no switching noise (linear) and very low switching noise (PWM switching) models and low impedance for applications such as Power Compliance Testing, Military, Aviation, EMC Testing, Manufacturing Test, Alternative Energy, Research and Design
    Product Range
  • Battery Test

    Battery Test

    Battery testing systems are required for basic charge/discharge cycling and simulating complex real-world applications such as drive profiles, telecom pulses, or other custom profiles. Applications include electrochemistry, Battery & Supercapacitor Testing, HPCE Measurements, Electrochemical Research and Development, Half Cell Testing and Materials Research, Life Cycle Testing and EIS (Electrochemical Impedance Spectroscopy)
    Product Range
  • Calibration/Metrology

    Calibration/Metrology

    Calibration Laboratories require the ability to Source and Measure parameters such as Voltage, Current, Frequency, Time, Phase, Resistance and Capacitance precisely as well as calibrate Electrical Equipment such as Multimeters, Insulation Testers, PATs, RCD Testers, Power Meters and Loop Testers Automatically using Calibration Software.
    Product Range
  • Frequency References, Standards and Oscillators

    Frequency References, Standards and Oscillators

    Atomic physics sets the standard for stability, accuracy and range of applications in precision frequency reference clocks worldwide. Frequency References are an integral component in many applications such as Military Communications, Metrology, Satellite Ground Stations, and test and measurement  as well as component level application. Advanced research, cutting edge engineering and packaging, superior manufacturing, and integrated software design all result in precision frequency standards that deliver exceptional performance and unsurpassed accuracy, stability and reliability in the most challenging environments.
    Product Range
  • Data Acquisition/DSP/FPGA

    Data Acquisition/DSP/FPGA

    Data Acquisition, Signal Conditioning and Data Communication products for industrial applications providing rugged signal and data integrity and wide spectrum accuracy as well as isolation and protection in hostile environments. Data Acquisition Systems are often used to acquire parameters such as Temperature, Voltage, Strain or Vibration to monitor and analyse the status of Bridges, Machinery and Batteries or Research and Development applications.
    Product Range
  • AE Techron

    AE Techron

    AE Techron, was founded as Audio Electronics Inc., in August of 1992, by former employees of the Techron division of Crown. Its purpose has been to create high-quality, durable electronic products for research, the military and industry—including EMC testing, MRI/NMR and the power relay test industries, offering lines of reliable Power Amplifiers, EMC Test Systems and Test and Measurement products, and an inventory of electronic building blocks that helps us to provide quick-to-market custom electronic solutions for our customers.
    Product Range
  • Vectawave

    Vectawave

    Vectawave Technology Ltd. was founded in 1997 by engineers with a wealth of experience in the design and manufacture of Power Amplifiers which are available with Frequency Ranges from 10kHz to 6GHz and power levels up to 2kW. Broadband Power Amplifiers based on this mature and proven technology well suited for integration into your EMC Immunity Test System.
    Product Range
  • DC Power Supplies

    DC Power Supplies

    Programmable DC Power Supplies are a basic piece of Test Equipment that is extremely useful in any laboratory including Benchtop or System form in Linear for low noise applications to Switching Power Supplies. Output Voltage ranges include are from 0 to 4000VDC and Power Output to xxx. features such as Voltage Sweep and Current Sweep as well as a digital voltmeter to monitor the output.
    Product Range
  • Digital Oscilloscopes

    Digital Oscilloscopes

    Digital Oscilloscopes are powerful capture and display tools that are used to acquire and analyse data for certain applications such as Power, Serial Data and Frequency Domain Analysis. With extremely fast processors and the need for equivalently fast Transmission Lines, there is a requirement to acquire very fast rise time signals for verification, reliability and suitability.
    Product Range
  • General Test

    General Test

    There are many test instruments that are used for General purpose testing in Laboratories and in the field as well as unique application in the electronic and electrical industry. These include Digital Multimeters, LCR Meters, Distortion Analysers, Signal Generators, Arbitrary Waveform Generators and Milli-Ohm Meters
    Product Range
  • High Voltage

    High Voltage

    High Voltage instrumentation which include Power Supplies, Amplifiers, Voltmeters and Function Generators are used to drive piezoelectric elements and for poling of piezoelectric materials as well as Electrostatic Measurement in applications such as Semiconductor Testing and in Industrial environments. High Voltage products are utilized in research for Smart Materials, Piezoelectrics, Plasma Chemistry, Materials Poling, Displays, Electrostatics, Mass Spectrometry, Electrocoalescence, Nanotechnology applications and more.
    Product Range
  • Noise & Vibration

    Noise & Vibration

    Shakers and Controller Systems

    If your application is determining the Reliability or Fatigue of a product is certain environments where the product will be exposed to shock or vibration then a Shaker system with an Amplifier and a Controller with 26000 lines of Resolution, 100dB Dynamic Range and Control Sine, Random or Shock to 50,000 Hz output would be the solution. Vibration Test Systems are available from 5N to 300kN Force.

    Noise, Sound and Vibration Analysis

    If your application is to monitor or balance the Vibration of rotary machinery bearings or measure and acquire the Sound Level of a certain environment then a 4 Channel, 40KHz, Portable Noise and Vibration Analyser that features FFT Analysis, Rotor Dynamic Balancing, Vibration Meter, Octave Analysis, Order Tracking, Data Recording, Bearing Analysis would be the solution.
    Product Range
  • NTP/PTP Network TimeServers

    NTP/PTP Network TimeServers

    IT Enterprise Network administrators working to provide Time Services to Hardened Network operations would require a GPS/GNSS Network Time Server with security-hardened NTP Reflector™ technology improving the security, accuracy and the reliability of the time services delivering exact hardware based Network Time Protocol (NTP) Timestamps. Features that need considering is a selection of Holdover Oscillators if Satellites are temporarily unavailable including Standard, OCXO and Rubidium as well as Advanced Security and Power Supply redundancy.
    Product Range
  • RF & Microwave

    RF & Microwave

    RF and Microwave Test Equipment include Spectrum Analysers, Signal Generators, Broadband Power Amplifiers, Interference and Direction Analysers, VNA Calibration Kits, Component Calibration Kits, Push/Pull Amplifiers and Tuners as well as a multitude of Precision Components, Cables and Adapters.
    Product Range
  • Telecommunications

    Telecommunications

    Microsemi's Time Synchronization products provide a single, unbiased Time References and Time Distribution systems that draws from multiple time sources such as GPS/GNSS, or Cesium Reference Standards providing accurate, centralized and redundant reference signals for the Communications and Telecommunications marketplace. Microsemi's Precision Time and Frequency Modular Synchronisation and Distribution Systems support an extensive variety of Input References, Oscillators, Output Frequencies, and Input/Output Interface styles with powerful network based Software Management tools and complete redundant power supply plans.
    Product Range
Top