• No products in the cart.

Teledyne SP Devices 14-Bit Digitizers

Showing all 6 results

  • Teledyne SP Devices ADQ7DC High Performance 14-Bit Digitizer

    The Teledyne SP-Devices ADQ7DC offers 14 bits Vertical Resolution in either Single or Dual Channel mode with 10 or 5 GSPS Sampling Rate respectively improving the Resolution in High-Sampling Rate applications beyond what was previously possible. The DC-coupled front-end supports variable DC offset and contains a user-programmable digital noise-reduction filter. It also offers 3 GHz Analogue input bandwidth and therefore supports a wide range of sensors and applications. Stand alone firmware packages simplify operation and offer time savings by providing a rich set of real time application specific functions without any need for FPGA firmware development. The open onboard Xilinx Kintex Ultrascale FPGA offers available resources for custom real-time digital signal processing (DSP).

    Key Features:

    • 3GHz Bandwidth
    • Sampling Rates to 10GS/s
    • 14 Bit Resolution
    • 1-2 Channels
    • Input Voltage Range: 1 Vpp
    • USB 3.0, 10GbE, PCIe, PXIe, MTCA.4
    • Peer to Peer steaming to GPU
    • Multi Channel Synchronisation
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ14 High Performance 14-Bit Digitizer

    The Teledyne SP-Devices ADQ14 is a 14-bit Digitizer family with 1, 2, or 4 channels and 0.5, 1, or 2 GSPS Sampling Rate. It is also available with either AC or DC coupling (ADQ14AC and ADQ14DC) and comes in six different form factors. This simplifies integration and enables cost-efficient system-level design. The ADQ14 offers AC- or DC-coupling and variable DC-bias. It is also available with variable voltage input range. This combined with high analogue input bandwidth makes it support a wide range of sensors. The on-board FPGA is made available to the user through a firmware development kit. Stand-alone firmware packages simplify operation by providing a rich set of application-specific real-time functions without any need for firmware development.

    Key Features:

    • Up to 1.2 GHz Bandwidth
    • Sampling Rates: 0.5, 1, 2 GSPS per channel
    • 14 Bit Resolution
    • 1, 2, 4 Channels
    • Coupling: AC or DC
    • Programmable DC-offset: Full signal range
    • High-precision clock/trigger with multiple modes and sources
    • USB 3.0, 10GbE, PCIe, PXIe, MTCA.4
    • Multi Channel Synchronisation
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ214 High Performance 14-Bit Digitizer

    The Teledyne SP-Devices ADQ 214 Digitizer features Dual Channels, 14-bit Resolution, 400 MSPS capture rate with 850 MHz analogue input bandwidth, and a memory buffer of 64 MSample per channel. The combination of High Speed, High Resolution and Wide Bandwidth makes it ideal for broadband applications such as IF sampling of RF signals and high-speed data recording. Excellent Spectral Purity in combination with Low Noise also makes the ADQ 214 ideal for noise measurements. The ADQ 214 comes with an AC-coupled AFE with the bandwidth 10 Hz – 850 MHz, which is optimized for Spectral Purity over several Nyquist bands. The AC AFE is suitable for RF/IF Sampling and Pulse measurements. There is also a software selectable DC coupled AFE with the bandwidth 350MHz which is optimized for Base Band Signaling and High Speed Data Recording


    Key Features:

    • DC – 850 MHz Bandwidth
    • Sampling Rates: 70 – 400 MSPS
    • 14 Bit Resolution
    • Dual Channels
    • USB 2.0 & PXIe
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ214-DCLN High Performance 14-Bit Low Noise Digitizer

    The Teledyne SP-Devices ADQ214-DCLN Digitizer features Dual Channels, 14-bit resolution, 400 MSPS capture rate and is optimized for Highly Accurate Low Noise measurements. The ADQ214-DCLN is ideal for Phase Noise measurements and wideband IQ-Receivers.
    The DC-coupled Low Noise front-end is optimized for spectral purity. The anti-aliasing 100 MHz low-pass filter prevents high frequency noise from being aliased into the signal band. The ADQ214-DCLN includes a digital real-time decimation filtering for noise suppression and accurate analysis. The ADQ 214-DCLN employs two Xilinx SX50T Virtex 5 FPGAs (XC5VSX50T-1). The user can access these FPGAs and implement customized digital signal processing by purchasing the ADQ Development Kit. This kit contains everything that is needed to get started with the FPGA development, and also includes examples and documentation.


    Key Features:

    • DC to 100MHz Bandwidth
    • Sampling Rates: 400 MSPS
    • 14 Bit Resolution
    • Single Channels
    • Noise level at 100 kHz-170 dBV/?(Hz)
    • USB 2.0 & PXIe
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ1600TD High Performance 14-Bit Time Domain Digitizer

    The Teledyne SP-Devices ADQ1600TD is a world-leading 14 bit Digitizer optimized for Time-Domain pulse capture. With its unique 1600 MSPS capture rate, enabled by SP Devices’ ADC interleaving technology ADX, the ADQ1600TD opens for demanding measurements such as time-domain pulse capture and high-speed data recording. The AFE of the ADQ1600TD is AC-coupled and optimized for low background noise over a large bandwidth. The adjustable bias together with the Digital Baseline Stabilization (DBS) technology increases the dynamic range for uni-polar pulses.

    Key Features:

    • 680MHz Bandwidth
    • Sampling Rates: 1.6 GSPS
    • 14 Bit Resolution
    • Single Channels
    • Optimised for Time Domain Pulse applications
    • USB 3.0,  PCIe, PXIe, MTCA.4
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software

  • Teledyne SP Devices ADQ1600RF High Performance 14-Bit RF Digitizer

    The Teledyne SP-Devices ADQ1600RF is a unique member of the ADQ V6 Digitizer family. Based on SP Devices’ interleaving technologies ADX and DBS, ADQ1600RF gets true 14bits performance at a Sampling Rate of 1.6 GSPS. This is an outstanding combination of high bandwidth and dynamic range, which enables demanding measurements such as direct RF/IF sampling of wide
    band systems.

    Key Features:

    • 750MHz Bandwidth
    • Sampling Rates: 1.6 GSPS
    • 14 Bit Resolution
    • Single Channels
    • Optimised for RF applications
    • USB 3.0, 10GbE, PCIe, PXIe, MTCA.4
    • Extensive Software Suites including stand alone operation
    • Drivers for C/C++, MATLABTM and more
    • Digitiser Studio Software
Top