• No products in the cart.

RF & Microwave

Showing 81–96 of 162 results

  • Amplifier Research Model 8000TP1G1z5 TWT Microwave Amplifier

    The Amplifier Research Model 8000TP1G1z5 TWT Microwave Amplifier is a self contained, forced air cooled, broadband travelling wave tube (TWT) microwave amplifier designed for pulse applications at low duty factors where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 8000 watts minimum peak RF pulse power at the amplifier output connector. Stated power specifications are at the fundamental frequency. The Amplifier Research Model 8000TP1G1z5 TWT Microwave Amplifier has a front panel digital display showing forward and reflected average power output or forward and reflected peak power, plus extensive system status information accessed through a series of menus via soft keys. Status indicators include power on, warm-up, standby, operate, faults, excess average or peak reflected power warning and remote.

    • Power: 8000 Watts Pulse
    • Frequency Range: 1GHz–1.5GHz
    • TWT
    • High Gain

  • Amplifier Research Model 150/150AW1000 Microwave Amplifier

    The Amplifier Research Model 150/150AW1000 Microwave Amplifier is a portable, self contained, air-cooled, dual-band, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 150/150AW1000 Microwave Amplifier is designed to have low spurious signals, exhibit very good linearity, and is extremely load tolerant which enables it to be used in many RF applications such as: RF susceptibility testing, antenna/component testing, and communication technology testing. It can be used as a test instrument covering multiple frequency bands and are suitable for a variety of communication technologies.

    The Amplifier Research Model 150/150AW1000 Microwave Amplifier is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The digital display on the front panel indicates control status and reports of internal amplifier status. All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS232 hardwire and fiber optic, USB, and Ethernet.

    • Power: 150 Watts CW
    • Frequency Range: 10KHz–10000MHz
    • Solid State
    • High Efficiency

  • Amplifier Research Model 15S1G6 Microwave Amplifier

    The Amplifier Research Model 15S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 15S1G6, when used with a sweep generator, will provide a minimum of 15 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 15S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 15 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency

  • Amplifier Research Model 30S1G6 Microwave Amplifier

    The Amplifier Research Model 30S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 30S1G6, when used with a sweep generator, will provide a minimum of 30 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 30S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 30 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency

  • Amplifier Research Model 60S1G6 Microwave Amplifier

    The Amplifier Research Model 60S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 60S1G6, when used with a sweep generator, will provide a minimum of 60 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 60S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 60 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency

  • Amplifier Research Model 125S1G6 Microwave Amplifier

    The Amplifier Research Model125S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 125S1G6, when used with a sweep generator, will provide a minimum of 125 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 125S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 125 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency

  • Amplifier Research Model 250S1G6 Microwave Amplifier

    The Amplifier Research Model250S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 250S1G6, when used with a sweep generator, will provide a minimum of 250 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 250S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 250 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency

  • Amplifier Research Model 350S1G6A Microwave Amplifier

    The Amplifier Research Model 350S1G6A Microwave Amplifier is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 350S1G6A, when used with a sweep generator, will provide a minimum of 350 watts of RF power.

    The Amplifier Research Model 350S1G6A Microwave Amplifier is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides Forward Power and Reflected Power values plus amplifier status. Special features include a gain control and RF output level protection.

    • Power: 350 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Solid State
    • High Efficiency

  • Amplifier Research Model 50S1G6AB Microwave Amplifier

    The Amplifier Research Model 50S1G6AB Microwave Amplifier is a solid-state, Class AB design, self-contained, air cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    The Amplifier Research Model 50S1G6AB Microwave Amplifier, when used with a sweep generator, will provide 50 watts typical of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Model 50S1G6AB is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm.

    • Power: 50 Watts CW
    • Frequency Range: 1GHz–6GHz
    • Class AB
    • High Efficiency

  • Amplifier Research Model 100S1G6AB Microwave Amplifier

    The Amplifier Research Model 100S1G6AB Microwave Amplifier is a solid-state, Class AB design, self-contained, air cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    The Amplifier Research Model 100S1G6AB Microwave Amplifier, when used with a sweep generator, will provide 100 watts typical of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Model 100S1G6AB is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm.

    • Power: 100 Watts CW
    • Frequency Range: 1GHz–6GHz
    • Class AB
    • High Efficiency

  • Amplifier Research Model 125S1G2z5 Microwave Amplifier

    The Amplifier Research Model 125S1G2z5 Microwave Amplifier is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Available in a stylish, contemporary cabinet for benchtop use or with cabinet removed for rack mounting.

    The Amplifier Research Model 125S1G2z5 Microwave Amplifier, when used with a sweep generator, will provide 125 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 125S1G2z5 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

    • Power: 125 Watts CW
    • Frequency Range: 1GHz–2.5GHz
    • Solid State
    • High Efficiency

  • Amplifier Research Model 250S1G2z5 Microwave Amplifier

    The Amplifier Research Model 250S1G2z5 Microwave Amplifier is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Available in a stylish, contemporary cabinet for benchtop use or with cabinet removed for rack mounting.

    The Amplifier Research Model 250S1G2z5 Microwave Amplifier, when used with a sweep generator, will provide 250 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 250S1G2z5 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

    • Power: 250 Watts CW
    • Frequency Range: 1GHz–2.5GHz
    • Solid State
    • High Efficiency

  • Amplifier Research Model 500S1G2z5 Microwave Amplifier

    The Amplifier Research Model 500S1G2z5 Microwave Amplifier is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Available in a stylish, contemporary cabinet for benchtop use or with cabinet removed for rack mounting.

    The Amplifier Research Model 500S1G2z5 Microwave Amplifier, when used with a sweep generator, will provide 500 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level.  Included is a front panel gain control which permits the operator to conveniently set the desired output level and an internal automatic level control (ALC) with local or remote control of the ALC threshold. The Amplifier Research Model 500S1G2z5 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

    • Power: 500 Watts CW
    • Frequency Range: 1GHz–2.5GHz
    • Gain: 57dB
    • High Efficiency

  • Amplifier Research Model 1000S1G2z5B Microwave Amplifier

    The Amplifier Research Model 1000S1G2z5B Microwave Amplifier is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required.

    The Amplifier Research Model 1000S1G2z5B, when used with a sweep generator, will provide a minimum of 1000 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Model 1000S1G2z5B is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

    • Power: 1000 Watts CW
    • Frequency Range: 1GHz–2.5GHz
    • Gain: 60dB
    • High Efficiency

  • Amplifier Research Model 2000S1G2z5 Microwave Amplifier

    The Amplifier Research Model 2000S1G2z5 Microwave Amplifier is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required.

    The Amplifier Research Model 2000S1G2z5, when used with a sweep generator, will provide a minimum of 2000 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Model 2000S1G2z5 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm.

    • Power: 2000 Watts CW
    • Frequency Range: 1GHz–2.5GHz
    • Gain: 63dB
    • High Efficiency

  • Amplifier Research Model 3000S1G2z5 Microwave Amplifier

    The Amplifier Research Model 3000S1G2z5 Microwave Amplifier is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    The Amplifier Research Model 3000S1G2z5 Microwave Amplifier, when used with a sweep generator, will provide a minimum of 3000 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 3000S1G2z5 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm.

    • Power: 3000 Watts CW
    • Frequency Range: 1GHz–2.5GHz
    • Gain: 64.8dB
    • High Efficiency
Top