• No products in the cart.

Data Acquisition Digitisers/DSP/FPGA

Showing 17–32 of 34 results

  • Fiso UMI Fibre Optic Data Acquisition System

    The UMI Signal Conditioner is designed to perform accurate multi-channel temperature, pressure, strain, refractive index, and displacement measurements. Thanks to its unique, patented technology, the UMI conditioner is capable of measuring the absolute cavity length of FISO’s Fabry-Perot fibre optic sensors with astonishing accuracy, providing highly accurate and reliable measurements. The UMI has a 0.01% full-scale resolution and a 0.025% full-scale precision.

    • 4 or 8 Channels
    • Temperature Measurement
    • Pressure Measurement
    • 20Hz Sampling
    • +/-5V Analogue Outputs
    • USB Interface

  • Elsys TranAX 3 Data Acquisition Software

    TranAX 3 is the universal Data Acquisition Software from Elsys designed for their complete range of Precision Data Acquisition Systems. TranAX 3 is a client-server application and remotely controls the data acquisition instrument over the local area networks. Complete settings and traces related to a project can be stored and recalled from disk, for maximum productivity. Several users can work with pre-defined GUI-layouts and hardware configurations. Advanced triggering allows the Transient Recorder to capture rare events as well as signal anomalies. Powerful data acquisition modes from scope mode to block mode and continuous mode for gap free real-time recording to disk allow the user to choose the appropriate scheme. This can be done with No Programming.

    • Event Controlled Recording
    • 40 Scalar Functions
    • Measurement data – Video Synchronization
    • Powerful Formula Editor
    • Oscilloscope & FFT Modes
    • Curve Fitting
    • Continuous Data Streaming to Hard Disk

  • Elsys Ballistic Analysis Software BallAX 3

    BallAX 3 is used to acquire and analyze measurement data from firearms, guns, artillery, projectiles and grenades using different ammunition and explosive propellants. Data gathered by the software aids in determining the accuracy and consistency of a projectile before it exits a firearm. Manufacturers of firearms ranging from basic hunting rifles to critical military artillery will benefit from the precision data afforded by this industry-specific software module.

    • 16 Pressure Measurements
    • 2 Temperature Measurements
    • 2 Velocity Measurements
    • Shot Ignition Delay Time
    • Time of Pmax
    • Shot Time
    • Muzzle Velocity
    • Delta-T and Cadence for Continuous Fire Measurements

  • Elsys TraNET FE Modular Data Acquisition System

    The TraNet FE family of Modular, Ethernet based Data Acquisition instruments provides turnkey solutions for many complex measurement problems. Because the TraNET Data Acquisition systems are designed for Precision, Flexiblity and and Portablity, they can be used to solve in situ problems in many applications automotive, power generation, transportation and train systems. The powerful triggering, deep memory, and versatile front end capability also solves problems in debug and verification of electronic and mechanical designs.

    • 32Ch SE, 16Ch DE
    • Up to 240 MS/s Sample Rate
    • 14 or 16-bit Resolution
    • Up to 128 MS Acquisition Memory/Ch
    • High-precision: 0.03% of FSR
    • Gb Ethernet Interface
    • Data Acquisition Software

  • Elsys TPCE PCIe Data Acquisition Card

    The Elsys TPCE Data Acquisition cards are high-resolution digitizers with sophisticated features such as advanced trigger mode, continuous data acquisition mode, differential inputs, digital input lines (Markers) and ICP coupling for powering piezo sensors. The various TPCE cards are compact short-form PCI Express (PCIe) card. A scalable data acquisition system may be started with one or several cards that can be extended in the future to build a solution with up to 64-channels in one housing.

    • 4Ch or 8Ch SE & DE
    • Up to 240 MS/s Sample Rate
    • 14 or 16-bit Resolution
    • ±50 mV to ±50 V Input Range
    • High-precision: 0.03% of FSR
    • Up to 1Gb Acquisition Memory
    • PCIe Interface
    • Data Acquisition Software

  • Elsys TraNET PPC Ruggedized Data Acquisition Recorder

    The portable Elsys Data Acquisition Recorder TraNET PPC is a high-precision instrument suitable for harsh environments and mission critical applications. It is a very compact, all in one data acquisition solution with a high channel density. The TraNET PPC was specifically designed for flexible portable usage to capture multiple channels simultaneously in applications such as ballistics, explosive tests or acoustic emission. The data streaming capability allows acquiring a continuous data stream to disk. In the unique Event Controlled Recording mode (ECR), blocks of data can be captured independently per channel or with associated channels if needed. Adjacent blocks may be overlapping to assure that no relevant information is missing. This mode is especially useful for monitoring and troubleshooting applications.

    • 24Ch SE, 12Ch DE
    • Up to 240 MS/s Sample Rate
    • 14 or 16-bit Resolution
    • Multi-Block Recording
    • High-precision: 0.03% of FSR
    • Up to 128 MS Acquisition Memory/Ch
    • Continuous Streaming to HardDisc
    • Complex Trigger and Maths Functions
    • 17? Display

  • Elsys SGA-2 Mk2 Strain Gauge Amplifier System

    The Strain Gauge Amplifier SGA-2 is designed as a differential front-end amplifier to connect full, half or ¼ bridge strain gauges with internal bridge completion.While the SGA-2 is matched to connect to an Elsys High Precision Transient Recorder it is also suitable for any 3rd party data acquisition system.

    • 4-wire and 6-wire Configuration
    • Internal ½- and ¾ Bridge Completion
    • 2-Channels per Module
    • 1.5 MHz bandwidth gain x1, x10
    • Low Offset Voltage Drift
    • Low Output Noise

  • Elsys SGA-2 Strain Gauge Amplifier System

    The Strain Gauge Amplifier SGA-2 is designed as a differential front-end amplifier to connect full, half or ¼ bridge strain gauges with internal bridge completion.While the SGA-2 is matched to connect to an Elsys High Precision Transient Recorder it is also suitable for any 3rd party data acquisition system.

    • 4-wire and 6-wire Configuration
    • Internal ½- and ¾ Bridge Completion
    • 2-Channels per Module
    • 1.5 MHz bandwidth gain x1, x10
    • Low Offset Voltage Drift
    • Low Output Noise

  • Elsys Low Noise Amplifier EL-LNA-2

    The amplifier EL-LNA-2 is designed as a differential Low Noise Amplifier with two gain stages of x10 and x100 with a full bandwidth of 20 MHz.While the EL-LNA-2 is matched to connect to an Elsys High Precision Transient Recorder it is also suitable for any 3rd party data acquisition system.

    • Gain x10 and x100
    • Differential Input Stage
    • Input noise 4.5 nV / (Hz)½
    • Input Impedance 1 MOhm
    • Bandwidth 20 MHz (G=10), 15 MHz (G=100)
    • Low Output Noise

  • Dataforth IoT Power & Energy Monitoring Module

    The PWRM Energy Monitoring Modules are IoT, Universal, High Accuracy, Compact, Self-Powered, electrical energy measurement devices that interface to three-phase and single-phase energy systems. Specifically designed for industrial and commercial heavy-duty new and retrofit applications, the modules provide a wide range of highly accurate power and energy measurement values over an operating temperature range of -40°C to +85°C. The DIN-rail mounted enclosures have pluggable terminal blocks for phase voltage and phase current which simplifies setup and maintenance, and the small format requires little space in control cabinets. The PWRMxx modules interface to phase voltages of 85–265VAC or 85–525VAC, 50/60Hz, and are self-powered from any of the lines. Higher voltage applications can be addressed using voltage transformers (VTs) and appropriate scaling in the module. Phase current inputs have an industry-standard range of 0VAC to 0.333VAC. An external shunt, current transformer, or Rogowski Coil is used to measure currents directly or non- contact.

  • Dataforth MAQ20 Industrial Data Acquisition System

    The MAQ®20 Industrial Data Acquisition System is a family of DIN rail mounted, programmable, multi-channel, industrially rugged DIN rail Signal Conditioning I/O & communication modules. One communication module can interface up to 24 I/O modules to create a 384ch System in 19″ Rack. Each I/O module has 1500Vrms isolation barrier and all field wiring terminals are heavily protected against overload and accidental connection of incorrect signals, as well as ESD. Parameters such as Voltage, Current, Temperature, Frequency, Strain, Acceleration and Relay Modules integrated in a System

  • Dataforth ReDaq Graphical Data Acquisition Software

    ReDAQ® Shape is Dataforth’s out-of-the-box Data Acquisition Software package. ReDAQ® Shape software ensures an exceptionally powerful Data Acquisition System.

    # Create, save, and open graphical user interface projects
    # Test, process, and analyze acquired data
    # Create Customized Presentation panels in 3 easy steps
    # Use built-in functions in the Acquire and Analyze panels
    # 18 high quality controls
    # Supports any graphical file format
    # Integrated, across-the-board applicability

    • Button, Text Box, Label
    • Thermometer, Tank, Meter
    • X-Y Plot, Slide, Gauge, Knob
    • Picture & Group Box
    • Oscilloscope
    • Numeric Edit
    • Chart Recorder

  • Dataforth DSCA High Performance DIN Isolated Analog Signal Conditioners

    Dataforth’s DSCA modules are Din Rail mountable Signal Conditioner Modules encompassing a wide selection of isolated analog input and output functions. Analog inputs include voltage and current in narrow and wide bandwidths, Thermocouple, RTD, Accelerometer, Potentiometer, Strain Gauge, Frequency, and 2-wire Transmitters.

    • Voltage I/O Modules
    • Thermocouple Modules
    • RTD Temperature Modules
    • Frequency Modules
    • Strain Modules

  • Dataforth SCM5B Signal Conditioning Modules

    More than 250 different 5B modules are available encompassing a wide selection of isolated analog input and output functions. Analog inputs include voltage and current in narrow and wide bandwidths, Thermocouple, RTD, Accelerometer, Potentiometer, Strain Gauge, Frequency, and 2-wire Transmitters.

    • Voltage I/O Modules
    • Thermocouple Module
    • RTD Temperature
    • Frequency Module
    • Strain Module
    • Accellerometer Module

  • Dataforth SCMPB Backplanes for SCM5B Module

    Dataforth offer a complete range of Backplane’s to suit the SCM5B range of Signal Conditioning Modules

  • Dataforth SCM7B Signal Conditioning Modules

    Each SCM7B module provides a single channel of isolated analog input or output. Various input modules accept analogue voltage or current signals from all types of field sensors and sources, filter, isolate, amplify, linearize, and convert these input signals to high-level analog outputs suitable for use in a process control system.

    • Isolated Current/Voltage Input Modules
    • Isolated Bipolar Voltage Output Modules
    • Linearized 2- Or 3-Wire RTD Input Modules
    • Thermocouple Module
    • Wide & Narrow Bandwidth
Top