AE Techron SmartGrid Solutions
Showing all 4 results
-
AE Techron Model 7212 Power Grid Simulator
The AE Techron 7212 is a Four-Quadrant, 0.44 kVA, DC-enabled Power Amplifier that was created to meet the exacting requirements of the Power Utility industry. It features a DC to 250 kHz Bandwidth, low noise floor, fast slew rate and a 113V RMS potential. The 7212 can be combined to form a 3-phase Y Voltage Source, and has a wide range of field-configurable options.
A single 7212 can output a 40mSec pulse with up to 30 amperes peak current. In continuous operation, a 7212 can provide 440 watts RMS of output power. If more voltage is needed, up to four amplifiers can be combined in series and operate as a single system. The 7212 can operate in either voltage or current mode and can be configured by the customer for high-voltage/low-current, medium voltage and current, or low- voltage/high-current applications. It provides very low noise and fast slew rates, and can safely drive a wide range of resistive or inductive loads.
Features:
- Up to 113V RMS at up to 4A
- 250KHz Bandwidth
- Pulsed output up to 30 Ap
- 430 watts RMS continuous output
- Low noise floor of only 300 µV
- Fast, 50 V/µs slew rate
- System output of over 1,700 watts is possible with multiple, interconnected amplifiers
-
AE Techron Model 7796RLY Test Amplifier
The AE Techron 7796RLYwas created to meet the demanding requirements of the Power Utility industry. Capable of outputting up to 200 amperes peak current, the 7796RLY is powerful enough to put Protection Relays, Fuses and other critical components through a full range of tests. It is capable of a controlled-voltage bandwidth of DC – 100 kHz and a controlled-current bandwidth of DC – 10 kHz. The low noise floor, low distortion and minimal phase error of the 7796RLY make it the ideal amplifier for power grid modeling. AE Techron’s 7796RLY offers a High compliance voltage allowing it to drive electromechanical relays directly maintaining phase accuracy for any load from a dead short to 0.25 ohms. Protection circuitry protects from input overloads, improper output connection including shorted and improper loads, over-temperature, over-current, and supply voltages that are too high or low.
Features:
- Up to 200 Ap (141A RMS) output power at 0.5 ohms
- Up to 183 Vp output voltage
- Stable when driving highly capacitive loads
- Standard Transconductance of 20 ±0.2% from short to 1-ohm load
- Residual noise of less than 2.5 mA peak, from 40 Hz to 600 Hz
-
AE Techron Model 7548RLY Test Amplifier
The AE Techron 7548RLY was created to meet the demanding requirements of the Power Utility industry. Capable of outputting up to 100 Amperes peak current, the 7548RLY is powerful enough to put Protection Relays, Fuses and other critical components through a full range of tests. The low noise floor, low distortion and minimal phase error of the 7548RLY make it the ideal amplifier for power grid modeling.. AE Techron’s 7224RLY offers a High compliance voltage allowing it to drive electromechanical relays directly maintaining phase accuracy for any load from a dead short to 0.25 ohms. Protection circuitry protects from input overloads, improper output connection including shorted and improper loads, over-temperature, over-current, and supply voltages that are too high or low.
Features:
- Up to 100 Ap (70A RMS) Output Power at 0.5 ohms
- Up to 195 Vp Output Voltage
- Stable when driving highly capacitive loads
- Standard Transconductance of 20 ±0.2% from short to 1-ohm load
- Residual noise of less than 2.5 mA peak, from 40 Hz to 600 Hz
-
AE Techron Model 7224RLY Test Amplifier
The AE Techron 7224RLY was created to meet the demanding requirements of the Power Utility industry. Capable of outputting a 40mSec pulse with up to 52 amperes peak current, the 7224RLY is powerful enough to put protection relays, fuses and other critical components through a full range of tests. The low noise floor, low distortion and minimal phase error of the 7224RLY make it the ideal amplifier for Power Grid modeling. AE Techron’s 7224RLY offers a High compliance voltage allowing it to drive electromechanical relays directly maintaining phase accuracy for any load from a dead short to 2 ohms. Protection circuitry protects from input overloads, improper output connection including shorted and improper loads, over-temperature, over-current, and supply voltages that are too high or low.
Features:
- Up to 50 Ap (35A RMS) Output Power at 0.5 ohms
- Up to 158 Vp Output Voltage
- Stable when driving highly capacitive loads
- Standard Transconductance of 20 ±0.2% from short to 1-ohm load
- Residual noise of less than 2.5 mA peak, from 40 Hz to 600 Hz
