APM Technologies Programmable DC Switching Power Supplies
Showing all 5 results
-
APM SP-1U/2U Series Programmable DC Power Supplies
APM’s SP-1U/2U Series DC Power Supplies provide stable DC output’s with wider Voltage and Current ranges. Current ranges up to 200A and Voltage ranges up to 800V are available. The SP-1U/2U Series DC Power Supplies output multiple voltage and current groups, set Timed Outputs and provide OVP, OCP, OPP, OTP, SCP set via the front panel or controlled by the PC. Standard interfaces include RS232, RS485, USB and GPIB is optional.
- Voltage: 20V- 800VDC
- Current: 7.5A to 200A
- Power: 600W to 4KW
- Low Ripple and Noise
- Remote compensation
- Support LIST/SEQUENCE file editing
- CC and CV mode
- 5 1/2 Digit DVM
- Voltage Sweep
- Current Sweep
- External Analogue Control input interface
- Standard USB/RS485/RS232 communication interface
-
APM SP-3U/6U Series Programmable DC Power Supplies
APM’s SP-3U/6U Series Programmable DC Power Supplies adopts high frequency isolation and active PFC design, achieving high efficiency at any output point. DSP and FPGA control circuit provides faster and stable internal data computing and response capability. An optional built-in electronic load enables the Power Supply to work as a two-quadrant Power Supply. Solar Array Simulation function provides a unique feature to simulate the output characteristics of a solar panel. Users can select built-in standard automotive power network voltage curves to do the DUT performance test directly according to the demand. Built-in smart 3-stage charging algorithm simulation is also offered for commonly known types of Batteries. List and Step modes can be used for auto sequence output. Built-in RS232, RS485 and USB communication interfaces are standard , GPIB or CAN communication interface is optional.
- Large Color Touch screen
- Voltage: 80V- 2250VDC
- Current: 21A to 1200A
- Power: 6kW to 36kW
- Low Ripple and Noise
- Remote compensation
- Support LIST/SEQUENCE file editing
- CC, CV & CP mode
- List/ Step mode programming
- DDS Arbitrary Function Generator option
- 5 1/2 Digit DVM
- Voltage & Current Sweep
- Solar Panel I-V curve simulation option
- Battery Simulator with Smart 3-stage charging algorithm simulation option
- Continuous Source & Sink function option
- External Analogue Control input interface
- Standard USB/RS485/RS232 communication interface
- GPIB or CAN communication interface optional
-
APM SPS Series Programmable DC Power Supply Systems
APM’s SPS Series DC Programmable Power Supply System provides stable DC output’s with wider Voltage and Current ranges. Current ranges up to 2000A and Voltage ranges up to 1200V are available. The SPS Series DC Power Supplies output multiple voltage and current groups, set Timed Outputs and provide OVP, OCP, OPP, OTP, SCP set via the front panel or controlled by the PC. Standard interfaces include RS232, RS485, USB and GPIB is optional.
- Large Color Touch screen
- Voltage: 32V- 1200VDC
- Current: 10A to 2000A
- Power: 6kW to 40kW
- Low Ripple and Noise
- Remote Sensing Compensation
- Support LIST/SEQUENCE file editing
- CC and CV mode
- 5 1/2 Digit DVM
- Voltage Sweep
- Current Sweep
- External Analogue Control input interface
- Standard USB/RS485/RS232 communication interface
-
APM EL Series Programmable DC Electronic Loads
APM’s EL Series High-Density Programmable DC Electronic Load provides three voltage ranges 200V/600V/1200V. With industry-leading Ultra-High power density technology, 4U height can reach 8.1kW. Supports CV, CC, CR and CP as well as CV+CC, CV+CR, CR+CC complex operating modes. Full protection including OCP, OPP, OTP, over voltage and reverse alarm. These units support external control and monitor mode. OCP test, OPP test and Short Circuit simulation effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, GPIB communication optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station, power electronics and other electronics products.
- Color Touch Screen
- Voltage: 200V- 1200VDC
- Current: 40A to 2880A
- Power: 600W to 27900W
- Adjustable Current Slew Rate
- Dynamic Frequency Sweep function
- V-monitor/I-monitor
- Ultra High Precision Voltage & Current measurement
- Timing & Discharging measurement for Battery Testing
- 50kHz High-Speed CC/CR Dynamic mode
- 500kHz High-Speed Voltage and Current Sampling Rate
- CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
- External Analogue Control input interface
- Standard USB/RS485/RS232 communication interface
-
APM ELS Series Programmable DC Electronic Loads
APM’s ELS Series High-Density Programmable DC Electronic Load is formed with 7U height units. The maximum input current and power of a single cabinet is up to 3000A, 73.5kW. The ELS Series supports Master-Slave configuration to increase the input capacity to 294kW. These cabinets use world famous circuit breaker to control the input of DC E-load moudle inside. After power on, the specified unit will be configured as a Master to control all of the slave units. In an emergency off situation the EMS will cut all units in the cabinet from AC supply, ensuring safe operation.
- Color Touch Screen
- Voltage: 200V- 1200VDC
- Current: 1440A to 3000A
- Power: 39.6kW to 73.5kW
- Adjustable Current Slew Rate
- Dynamic Frequency Sweep function
- V-monitor/I-monitor
- Ultra High Precision Voltage & Current measurement
- Timing & Discharging measurement for Battery Testing
- 50kHz High-Speed CC/CR Dynamic mode
- 500kHz High-Speed Voltage and Current Sampling Rate
- CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
- External Analogue Control input interface
- Standard USB/RS485/RS232 communication interface