• No products in the cart.

EMC Test

Showing 9–16 of 88 results

  • AE Techron Model T1000 Magnetic-Field Susceptibility Transformer

    The T1000 Magnetic-Field Susceptibility Transformer was designed to exceed the AF Magnetic Field susceptibility test requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2. It may also be used as a 10-to-1 step-down transformer for output current of up to 100ARMS.

    The T1000 transformer provides up to 300A-m and is able to generate up to 100ARMS. The turns ratio provides a ten-to-one step down to the secondary winding.

    The AE Techron Model  T1000 provides convenient input connectors via binding posts. Standard 0.75-inch spacing of binding posts allows use of standard plugs. Output is via Multi Contact 125A plugs.

    A 12-amp circuit breaker protects the unit against over-current conditions. A rugged, impact-resistant case and robust design protects the transformer from accidental damage.

     

    • Up to 100 ARMS secondary current
    • Small signal response up to 250KHz
    • Provides up to 300 A-m
    • Ten-to-one step-down
    • Output via Multi Contact 125A plugs
    • Testing to DO 160 Section 19 and Boeing D6-16050-5 Section 7.2 standards

  • AE Techron Model T2000 Low-Frequency Conducted Susceptibility Transformer

    The T2000 Audio-Bandwidth Conducted Susceptibility Transformer was designed to meet or exceed the LF conducted susceptibility test requirements of DO 160 Section 18. The T2000 is used to apply the required test signals to the lines under test for ripple voltage tests and continuous or transient conducted immunity tests. It may also be used as a 2-to-1 step-down transformer. The secondary can support up to 40AP.

    The T2000 transformer supports up to 200W and is able to pass up to 40AP on the secondary. The turns ratio provides a 2-to-1 step down.

    The T2000 provides convenient input connectors via binding posts. Standard 0.75-inch spacing of binding posts allows use of standard plugs. Output is via Multi Contact 125A plugs.

    A thermal breaker protects the unit against over-current conditions on the primary. A 35 ARMS breaker protects the unit against over-current conditions on the secondary. A rugged, impact-resistant case and robust design protects the transformer from accidental damage.

    • Frequency response: 10 Hz to 250 kHz
    • Up to 200W audio power
    • Up to 40 Ap AC or DC secondary current
    • Two-to-one step-down
    • Output via Multi Contact 125A plugs
    • Testing  to DO 160 Section 16 and 18 standard

  • AE Techron Model T3700 Electric Field Susceptibility Transformer

    The T 3700 Electric-Field Susceptibility Transformer was designed to meet or exceed the voltage requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2 testing. It may also be used as a 1-to-37 step-up transformer for voltages up to 3700 VRMS.

    The T 3700 transformer is able to generate up to a 3700 VRMS potential. It is withstand tested to 135% of rated output to ensure a long, trouble-free life. The turns ratio provides a 1-to-37 step up to the secondary winding.

    The AE Techron  T 3700 provides convenient input connectors via touch-proof, four-way binding posts. Standard 0.75-inch spacing of binding posts allows use of standard plugs.

    A 1-amp fuse protects the unit against over-current conditions. A rugged, impact-resistant case and robust design protects the transformer from accidental damage.

    The T 3700’s voltage output meets or exceeds the requirements of DO 160 Section 19 and Boeing D6-16050-5 Section 7.2. It is for use by experienced staff.

    • Up to 3700VRMS
    • Robust withstand testing to 5,000 VDC
    • 1-to-37 step-up
    • Frequency range: 250 Hz to 35 kHz
    • Output via LGH high-voltage connector
    • Testing  to DO 160 Section 19 and Boeing D6-16050-5 Section 7.2 standards

  • Amplifier Research EMC Test Systems

    Amplifier Research can deliver a solution that integrates all your testing needs: radiated and conducted immunity,radiated and conducted emissions, electrostatic discharge, lightning simulation…whatever you need. We have the expertise and experience to supply fully automated systems needed to test various standards including IEC 61000, MIL-STD 461 and 464, DO-160, wireless, automotive, HIRF and HERO. Fully Integrated Test Systems For any application from DC to 50 GHz. Whether you choose one of our standard test systems or have AR build a system to your specs – you’ll be amazed at how easy, accurate, efficient, and affordable testing can be. Everything you need is right at your fingertips. It all works together perfectly, because everything has been carefully selected and assembled by AR engineers, using the most dependable and most innovative equipment on the market today.

  • Amplifier Research Model 8000TP1G1z5 TWT Microwave Amplifier

    The Amplifier Research Model 8000TP1G1z5 TWT Microwave Amplifier is a self contained, forced air cooled, broadband travelling wave tube (TWT) microwave amplifier designed for pulse applications at low duty factors where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 8000 watts minimum peak RF pulse power at the amplifier output connector. Stated power specifications are at the fundamental frequency. The Amplifier Research Model 8000TP1G1z5 TWT Microwave Amplifier has a front panel digital display showing forward and reflected average power output or forward and reflected peak power, plus extensive system status information accessed through a series of menus via soft keys. Status indicators include power on, warm-up, standby, operate, faults, excess average or peak reflected power warning and remote.

    • Power: 8000 Watts Pulse
    • Frequency Range: 1GHz–1.5GHz
    • TWT
    • High Gain

  • Amplifier Research Model 150/150AW1000 Microwave Amplifier

    The Amplifier Research Model 150/150AW1000 Microwave Amplifier is a portable, self contained, air-cooled, dual-band, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 150/150AW1000 Microwave Amplifier is designed to have low spurious signals, exhibit very good linearity, and is extremely load tolerant which enables it to be used in many RF applications such as: RF susceptibility testing, antenna/component testing, and communication technology testing. It can be used as a test instrument covering multiple frequency bands and are suitable for a variety of communication technologies.

    The Amplifier Research Model 150/150AW1000 Microwave Amplifier is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The digital display on the front panel indicates control status and reports of internal amplifier status. All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS232 hardwire and fiber optic, USB, and Ethernet.

    • Power: 150 Watts CW
    • Frequency Range: 10KHz–10000MHz
    • Solid State
    • High Efficiency

  • Amplifier Research Model 15S1G6 Microwave Amplifier

    The Amplifier Research Model 15S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 15S1G6, when used with a sweep generator, will provide a minimum of 15 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 15S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 15 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency

  • Amplifier Research Model 30S1G6 Microwave Amplifier

    The Amplifier Research Model 30S1G6 Microwave Amplifier is a solid-state, Class A design, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.  The Amplifier Research Model 30S1G6, when used with a sweep generator, will provide a minimum of 30 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The Amplifier Research Model 30S1G6 Microwave Amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

    • Power: 30 Watts CW
    • Frequency Range: 700MHz–6GHz
    • Class A
    • Solid State
    • High Efficiency
Top