• No products in the cart.

AC & DC Power Supply/Load

Showing 17–28 of 28 results

  • Pacific Power Model LMX Series AC Linear Power Supplies

    The Pacific Power LMX Series encompasses an all new collection of High Performance 1 phase and 3 phase Linear AC Power Sources. The linear amplifiers within the LMX Series power sources are unmatched in their ability to produce the high crest factor, low-distortion, high fidelity output waveforms required by the most demanding AC Test Power applications. Stand-alone models range from 500 VA to 6 kVA. Larger chassis may be paralleled to create systems that range from 8kVA to 30 kVA. Offering both single and three phase models, units are conservatively designed with output power ratings are based on the most severe combination of input line, output voltage, power factor, and temperature.

    Great emphasis has been placed on low acoustic noise, ease of installation, ease of use and safety. Control and operating features provide a high degree of application versatility and ease of use for the test engineer. Applications range from simple, manually controlled frequency conversion to power-line susceptibility testing and sophisticated bus programmable transient simulation.

    • Output Power Range: 500VA to 30kVA
    • AC Output Voltage Range Direct: 0-135 VAC L-N / 0-234 VAC L-L 3ø
    • AC Output Voltage Range T-Option: 0-338 VAC L-N / 0-585 VAC L-L 3ø
    • Output Frequency Range: 15 to 5,000 Hz
    • Waveform Creation by Harmonic Synthesis
    • Waveform Scope Function (Voltage and Current)
    • Harmonic Analysis (Voltage and Current)
    • Less than 0.1% Vthd Distortion up to 450Hz
    • Ripple and Noise less than -72dB
    • Phase Angle Programming on 3ø Models
    • Standard USB, LAN, RS232 & GPIB Interfaces

  • Pacific Power Model LSX Series AC Power Supplies

    The Pacific Power LSX Series is a family of High Performance Switching AC Power Sources covering the power range from 1.5kVA to 6kVA. The product line offers both single and three phase models. Units are conservatively designed and output power ratings are based on the worst case combination of input line, output voltage, power factor, and temperature.

    Great emphasis has been placed on low acoustic noise, ease of installation, and maximum power per cubic inch of rack space. Control and operational features provide a high degree of application versatility and ease of use for the test engineer. Applications range from simple, manually controlled frequency conversion (LSXM versions) to harmonic testing and sophisticated bus programmable transient simulation (LSX versions). Power conversion within the LSX Series is achieved by high frequency pulse width modulation, resulting in cool, quiet and efficient operation.

    • Output Power Range: 1.5kVA to 6kVA.
    • AC Output Voltage Range Direct: 0-132 VAC L-N / 0-300VAC L-L 3ø
    • AC Output Voltage Range T-Option: 0-264 VAC L-N / 0-540 VAC L-L 3ø
    • Output Frequency Range: 15 to 5,000 Hz
    • 200 Waveform Library – Arbitrary Waveform Generator
    • Precision True-RMS metering of Volts, Amps, and Power for displays and reporting
    • LabVIEW for Windows®/LabWindows® drivers
    • 200 stored programs for both static and dynamic Transient Testing
    • Waveform Creation by Harmonic Synthesis
    • High Speed Digital Scope function via web browser
    • Harmonic Analysis (Voltage and Current)
    • Standard USB, LAN, RS232 & GPIB Interfaces

  • Pacific Power Model ADF AC Power Supplies

    The Pacific Power ADF Series is a family of high power, single and three phase, AC output capable Power Sources. Available models range from 15 kVA to 90 kVA. The new ADF Series of products offers cost-effective, stable and well-regulated AC power conversion from 45Hz to 500Hz with output voltages up to 300Vac on single-phase models and 300VLN and 520VLL on three-phase models. Higher frequency and voltage output options are available if needed. Output power starts at 15kVA per 4U rack high unit as models 1150ADF and 3150ADF for single or three phase requirements respectively.  Single-phase models are offered up to 45kVA and three-phase models up to 90kVA using a master/slave parallel scheme. These master/slave power source configurations can be ordered for self-installation into a customers’ 19” instrument rack or completed assembled in an off-the shelf 19” Cabinet from the factory.

    The ADF series builds on the existing all digital power conversion technology developed for the widely successful AFX Series but encompasses only the most used features and functions for product test, ATE and burn-in applications for automated test applications.

     

    • Output Power Range: 15kVA to 90kVA
    • Output Voltage Range:  AC: 0-300 VAC L-N / 0-520 VAC L-L
    • Output Frequency Range: 15Hz to 1200Hz (Req option F)
    • Active Three Phase PFC input with inrush current limiting
    • Precise Output Voltage  and Load Regulation
    • Full Metering
    • Unique Sleep Mode
    • USB, LAN, RS232 & GPIB Interface
    • Compact Size
    • All Digital Conversion Technology

  • Pacific Power Model AFX AC + DC Power Supplies

    The Pacific Power AFX Series is a family of high power, single, split and three phase, AC, DC and AC+DC output capable Power Sources. Available models range from 6 kVA to 90 kVA with available configurations to 150kVA. Using a modern user interface for ease of use, the AFX Series is cost effective and fully programmable for both basic frequency conversion and advanced AC power line or DC power disturbance test applications.

    • AC Output, DC Output, AC+DC Output
    • Voltage: 0 to 600VAC
    • Power: 6kVA to 90kVA
    • Freq: 20Hz to 3000Hz
    • Form: 1, 2 & 3 Phase

  • Pacific Power Model AMX Linear AC Power Supplies

    When power quality matters, the Pacific Power AMX Series family of High Performance Linear AC Power Sources is the answer. The linear amplifiers are unmatched in their ability to produce the high crest factor, low-distortion, high fidelity output waveforms required by the most demanding AC Test Power applications.

    • Voltage: 0 to 600VAC
    • Power: 1500VA to 12kVA
    • Freq: 20Hz to 5000Hz
    • Form: 1, 2 & 3 Phase

  • Pacific Power Model ASX AC Power Supplies

    The ASX Series is a family of fully featured, single and three phase AC Power Sources. Available models range from 1.5kVA to 12kVA with either Manual or Programmable Control. Cost effective and fully programmable for both basic frequency conversion and advanced AC power line disturbance test applications.

    • Voltage: 0 to 600VAC
    • Power: 1500VA to 12kVA
    • Freq: 15Hz to 1,200Hz
    • Form: 1, 2 & 3 Phase

  • APM SP-1U/2U Series Programmable DC Power Supplies

    APM’s  SP-1U/2U Series DC Power Supplies provide stable DC output’s with wider Voltage and Current ranges. Current ranges up to 200A and Voltage ranges up to 800V are available. The SP-1U/2U Series DC Power Supplies output multiple voltage and current groups, set Timed Outputs and provide OVP, OCP, OPP, OTP, SCP  set via the front panel or controlled by the PC. Standard interfaces include RS232, RS485, USB and GPIB is optional.

    • Voltage: 20V- 800VDC
    • Current: 7.5A to 200A
    • Power: 600W to 4KW
    • Low Ripple and Noise
    • Remote compensation
    • Support LIST/SEQUENCE file editing
    • CC and CV mode
    • 5 1/2 Digit DVM
    • Voltage Sweep
    • Current Sweep
    • External Analogue Control input interface
    • Standard USB/RS485/RS232 communication interface

  • APM SP-3U/6U Series Programmable DC Power Supplies

    APM’s  SP-3U/6U Series Programmable DC Power Supplies adopts high frequency isolation and active PFC design,  achieving high efficiency at any output point. DSP and FPGA control circuit provides faster and stable internal data computing and response capability. An optional built-in electronic load enables the Power Supply to work as a two-quadrant Power Supply. Solar Array Simulation function provides a unique feature to simulate the output characteristics of a solar panel. Users can select built-in standard automotive power network voltage curves to do the DUT performance test directly according to the demand. Built-in smart 3-stage charging algorithm simulation is also offered for commonly known types of Batteries. List and Step modes can be used for auto sequence output. Built-in RS232, RS485 and USB communication interfaces are standard , GPIB or CAN communication interface is optional.

    • Large Color Touch screen
    • Voltage: 80V- 2250VDC
    • Current: 21A to 1200A
    • Power: 6kW to 36kW
    • Low Ripple and Noise
    • Remote compensation
    • Support LIST/SEQUENCE file editing
    • CC, CV & CP mode
    • List/ Step mode programming
    • DDS Arbitrary Function Generator option
    • 5 1/2 Digit DVM
    • Voltage & Current Sweep
    • Solar Panel I-V curve simulation option
    • Battery Simulator with Smart 3-stage charging algorithm simulation option
    • Continuous Source & Sink function option
    • External Analogue Control input interface
    • Standard USB/RS485/RS232 communication interface
    • GPIB or CAN communication interface optional

  • APM SPS Series Programmable DC Power Supply Systems

    APM’s  SPS Series DC Programmable Power Supply System provides stable DC output’s with wider Voltage and Current ranges. Current ranges up to 2000A and Voltage ranges up to 1200V are available. The SPS Series DC Power Supplies output multiple voltage and current groups, set Timed Outputs and provide OVP, OCP, OPP, OTP, SCP  set via the front panel or controlled by the PC. Standard interfaces include RS232, RS485, USB and GPIB is optional.

    • Large Color Touch screen
    • Voltage: 32V- 1200VDC
    • Current: 10A to 2000A
    • Power: 6kW to 40kW
    • Low Ripple and Noise
    • Remote Sensing Compensation
    • Support LIST/SEQUENCE file editing
    • CC and CV mode
    • 5 1/2 Digit DVM
    • Voltage Sweep
    • Current Sweep
    • External Analogue Control input interface
    • Standard USB/RS485/RS232 communication interface

  • APM EL Series Programmable DC Electronic Loads

    APM’s  EL Series High-Density Programmable DC Electronic Load provides three voltage ranges 200V/600V/1200V. With industry-leading Ultra-High power density technology, 4U height can reach 8.1kW. Supports CV, CC, CR and CP as well as CV+CC, CV+CR, CR+CC complex operating modes. Full protection including OCP, OPP, OTP, over voltage and reverse alarm. These units support external control and monitor mode. OCP test, OPP test and Short Circuit simulation effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, GPIB communication optional. Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station, power electronics and other electronics products.

    • Color Touch Screen
    • Voltage: 200V- 1200VDC
    • Current: 40A to 2880A
    • Power: 600W to 27900W
    • Adjustable Current Slew Rate
    • Dynamic Frequency Sweep function
    • V-monitor/I-monitor
    • Ultra High Precision Voltage & Current measurement
    • Timing & Discharging measurement for Battery Testing
    • 50kHz High-Speed CC/CR Dynamic mode
    • 500kHz High-Speed Voltage and Current Sampling Rate
    • CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
    • External Analogue Control input interface
    • Standard USB/RS485/RS232 communication interface

  • APM ELS Series Programmable DC Electronic Loads

    APM’s  ELS Series High-Density Programmable DC Electronic Load  is formed with 7U height units. The maximum input current and power of a single cabinet is up to 3000A, 73.5kW. The ELS Series supports Master-Slave configuration to increase the input capacity to 294kW. These cabinets use world famous circuit breaker to control the input of DC E-load moudle inside. After power on, the specified unit will be configured as a Master to control all of the slave units. In an emergency off situation the EMS will cut all units in the cabinet from AC supply, ensuring safe operation.

    • Color Touch Screen
    • Voltage: 200V- 1200VDC
    • Current: 1440A to 3000A
    • Power: 39.6kW to 73.5kW
    • Adjustable Current Slew Rate
    • Dynamic Frequency Sweep function
    • V-monitor/I-monitor
    • Ultra High Precision Voltage & Current measurement
    • Timing & Discharging measurement for Battery Testing
    • 50kHz High-Speed CC/CR Dynamic mode
    • 500kHz High-Speed Voltage and Current Sampling Rate
    • CV/CC/CR/CP, and CV+CC/CV+CR/CR+CC complex operating modes
    • External Analogue Control input interface
    • Standard USB/RS485/RS232 communication interface

  • Stanford Research PS300 Series High Voltage Power Supplies

    The PS300 Series High Voltage Power Supplies — rugged, compact, reliable instruments for just about any high voltage application. With up to 20 kV output capability, a GPIB computer interface, and 0.001 % voltage regulation, these high voltage power supplies have become the industry standard.

    • +20 kV, -20 kV, +10 kV, -10 kV, ±5 kV, ±2.5 kV, ±1.25 kV Ranges
    • 1 Volt Resolution
    • 0.05 % Accuracy
    • Programmable Limits and Trips
    • GPIB interface
    • RS-232 interface (10 kV & 20 kV models)
Top